Before installation
The substrate must be dry, clean, level and sound. Follow the selected product’s guide for site conditions, expansion gaps and locking-system requirements.
Installation & Care
Daily care
Remove dust and grit regularly; use a suitable cleaning product and a lightly damp cloth. Avoid abrasive products and remove spills promptly.
Installation & Technical Documents
Compare flooring options.
Consider material construction and application characteristics together. This comparison is a general guide; product selection should be based on the relevant technical data sheet and installation guide.
| Criterion | STONEKS SPC | Laminate flooring | Engineered wood flooring | LVT / flexible vinyl |
|---|---|---|---|---|
| Core | Limestone + PVC; dense and rigid | HDF (wood fibre) | Wood layers; plywood core depending on the product | Flexible vinyl construction |
| Water resistance | The SPC core is water-resistant; joints and installation details require separate assessment. | Standard models may swell with moisture; water resistance varies by product. | Not waterproof; prolonged moisture and leaks may cause damage. | The vinyl plank is water-resistant; joints and subfloor details are important. |
| Dimensional stability | The dense, rigid core supports dimensional stability; temperature and expansion conditions must be considered. | May move with changes in temperature and humidity. | More stable than solid wood; still responds to heat and moisture. | May be affected by temperature changes; installation conditions matter. |
| Impact resistance | The dense core supports impact and point-load resistance; refer to the technical data sheet. | Impact resistance varies by product class; moisture may affect the core. | Wood surfaces may dent or mark; resistance depends on wood species and surface finish. | Point loads may leave marks on the flexible surface; subfloor evenness is important. |
| Installation | Click-lock models use an adhesive-free floating installation. The subfloor must be level, dry and sound. | Usually a floating click-lock system; follow the product guide. | Floating or glue-down installation, depending on the product. | Glue-down or click-lock installation, depending on the product; an even, prepared subfloor is required. |
| Underfloor heating | Suitable for underfloor heating. Maximum floor surface temperature is 27 °C. | Check compatibility, thermal resistance and expansion requirements in the manufacturer’s guide. | Compatibility and temperature limits depend on the product; thickness affects thermal resistance. | Underfloor heating suitability depends on thermal resistance, surface temperature limits and installation method. |
| Use in moisture-prone areas | Suitable for areas exposed to everyday splashes in kitchens and bathrooms. Continuously wet areas such as drained showers require a separate flooring and waterproofing system. | Assessed according to the water-resistance declaration; use of standard models is limited. | Generally preferred for dry living spaces. | May be considered with a suitable product and installation system; waterproofing must be provided separately. |
Water-resistant flooring does not replace structural waterproofing. Subfloor preparation and the manufacturer’s installation requirements matter for every system.
Technical guidance for your project.
Share your product code and intended application so we can review the relevant data sheet, document scope and installation details with you.