SILVA STAIR
ICE WHITE
Soft grey tones
STX-SVS011
PREMIUM SPC / STAIR COLLECTION
Character in every space.
In every step.
In every step.
From floor to stair with SILVA STAIR.
Colour. Texture. Continuity.
TREAD + RISER / U-RETURN PROFILESTONEKS / SILVA STAIR
SPC Stair Tread and Riser Systems
01 / SILVA STAIR
Ten decors.
One design language.
A collection that brings the colour and grain of wood to treads and risers. Consider the staircase finish alongside the floor, walls and light.
The U-return front edge gives the tread a defined finish. A matching riser carries the same material language between levels.
10selected decors
U-returntread profile
1 settread + riser
SILVA STAIR
LIGHT GOLD
Sand tones
STX-SVS064
SILVA STAIR
CREAM BROWN
Warm tones
STX-SVS081
SILVA STAIR
EARTH BEIGE
Sand tones
STX-SVS065
SILVA STAIR
CHESTNUT
Brown tones
STX-SVS105
SILVA STAIR
CLOUD GREY
Soft grey tones
STX-SVS021
SILVA STAIR
COOL GREY
Smoky tones
STX-SVS031
SILVA STAIR
DARK GREIGE
Smoky tones
STX-SVS049
SILVA STAIR
MID GREIGE
Smoky tones
STX-SVS040
SILVA STAIR
HAZELNUT BEIGE
Sand tones
STX-SVS077
Select a decor to enlarge its surface. Confirm the final colour and texture using a physical sample.
02 / PRODUCT STRUCTURE AND DIMENSIONS
Design on the surface.
Continuity in the detail.
A cladding system combining an SPC surface with a wood-based support, supplied as treads and matching risers.
The profile and backing images illustrate the construction. Final colour and surface selection are confirmed against the relevant decor sample.
- Tread
- 300 × 1180 mm11 mm total · 5 mm SPC + 6 mm wood-based backing
- Riser
- 200 × 1180 mm5 mm thick · Completes the vertical face of the step
- Wear layer
- 0,30 / 0,55 mmWear layer specified in the order
- Set contents
- 1 tread + 1 riser1 box = 2 sets = 4 pieces
- Installation
- Adhesive installationOver a sound, level and dry existing stair substrate
04 / APPLICATION AND INSTALLATION
From living spaces
to project interiors.
From residential staircases to office, retail and hospitality projects. Assess traffic levels, wear layer and installation conditions together.
Prepare the substrate
The existing stair must be level, clean, dry and sound, with nosing and edge details prepared for installation.
Verify measurements on site
Measure the tread and riser separately, then cut each piece carefully to the project dimensions.
Install and allow to cure
Use an adhesive suitable for the product and substrate. Allow the specified curing time before applying loads.
Follow the current product and adhesive instructions for installation. Protect the wood-based support and joints from prolonged water exposure; the cladding does not replace structural waterproofing.
05 / CARE AND WARRANTY
Care that preserves
the surface appearance.
Regular cleaning and suitable care help preserve the surface appearance.
Daily care
Remove dust with a soft broom or microfibre cloth. Use a lightly damp cloth and a suitable surface cleaner; do not allow water to pool.
Protecting the surface
Avoid abrasive pads, harsh chemicals, sharp objects, impacts and dragging loads. Contact technical support if joints become loose.
LIMITED WARRANTY
25 yearsResidential use
10 years / 0,55 mmLight commercial use
7 years / 0,30 mmLight commercial use
The warranty term depends on the wear layer of the ordered product. Coverage, exclusions and claim procedures are defined in the STONEKS warranty document.
06 / CATALOGUE AND INSTALLATION
From selection
to installation.
Find current decors, dimensions and ordering information on this page.
Stair Installation Guide (TR)Preparation, measurement and installation stepsPDF ↗Installation and Frequently Asked Questions (TR)Product and installation detailsPDF ↗FOR YOUR PROJECT
Let us select
the right texture for your stairs.
Confirm your decor, sample, dimensions and order plan with the STONEKS team.
Request a quote